Office Partition & Renovation Contractor in KL & Selangor
Gypsum drywall, aluminium-framed glass, frameless glass and operable walls — measured, supplied and installed by our own CIDB-certified crew. One office renovation contractor for the entire floor.
Last updated: 11 June 2026
Book a free site visit →Hypro Renovation supplies and installs office partition systems across KL, Selangor and the Klang Valley: gypsum drywall, aluminium-framed glass, frameless glass and operable walls. Drywall starts around RM8 to RM14 per square foot, glass runs higher, and most offices finish in 1 to 4 weeks. CIDB-certified installers, free site visit, fixed itemised quote. WhatsApp 017-786 8793 to book.
Office Partition Types We Install
We install four main office partition systems: gypsum drywall partitions, aluminium-framed glass, frameless tempered glass and operable walls. We also handle the renovation works around them, so one team builds the whole office.
Gypsum drywall partition wall
The workhorse. Full-height, paintable, hides wiring inside the cavity, and takes rockwool infill for quiet meeting rooms. Best value per square foot.
Aluminium-framed glass partition
Tempered glass panels in slim powder-coated frames. Daylight reaches the middle of the floor and managers keep visual contact with the team.
Frameless glass partition
10mm or 12mm tempered panels with minimal joints. The premium look for boardrooms and client-facing fronts. See our glass partition page for designs.
Operable / movable wall
Acoustic panels that slide on a ceiling track, so a training room splits into two and rejoins for town halls.
Many offices also ask for a half-glass hybrid: an office divider partition with drywall below and glass above, which gives seated privacy without losing light. And because Hypro works as an office renovation contractor, not just a partition installer, the same crew coordinates ceilings, lighting, electrical points, doors and painting around your new walls.
Want to see the finish quality before you call? — Browse completed offices, meeting rooms and shopfronts across KL and Selangor. See our office projects →
Why Choose Hypro
Hypro is a CIDB-certified office partition contractor with 20+ years in ceiling and partition works. Our own installers do every job, no subcontracting, and every quotation is itemised line by line.
Partitions, ceilings, lighting and paint — all coordinated by one CIDB-certified crew across KL and Selangor.
Office Partition Price in Malaysia
In 2026, a gypsum drywall office partition wall costs around RM8 to RM14 per square foot installed in KL and Selangor. Aluminium-framed glass runs RM28 to RM45, frameless glass RM40 to RM70, and operable walls RM80 to RM140. Get an exact figure with a free site measurement.
Per-square-foot rates only become an accurate quote once wall height, finishes and site conditions are confirmed, but the ranges below cover most office jobs we price. Market rates compiled in Partition.my's 2026 price guide fall in the same bands.
| Partition system | Installed price (per sq ft) | Relative cost |
|---|---|---|
| Gypsum drywall partition | RM8 – RM14 | RM8–14 |
| Aluminium-framed glass | RM28 – RM45 | RM28–45 |
| Frameless tempered glass | RM40 – RM70 | RM40–70 |
| Operable / movable wall | RM80 – RM140 | RM80–140 |
Source: Hypro Renovation project quotations, KL & Selangor, 2024–2026. Market cross-check: Partition.my.
Key takeaway — Budget RM8 to RM14 per square foot for drywall and roughly triple for glass. Then confirm with a site visit, because wall height, door count and building rules move the number.
What Affects Your Quote
Materials and labour make up about three-quarters of a typical office partition quote. The rest is doors, hardware, electrical relocation and making good. Tall walls, after-hours building rules and old partition demolition add surcharges, which is why a free site visit beats any phone estimate.
| Cost component | Typical share of quote | What moves it |
|---|---|---|
| Boards, glass & framing | ~45% | Board grade, glass thickness, frame type |
| Labour & installation | ~30% | Wall height, site access, night works under building rules |
| Doors & hardware | ~15% | Door count, locksets, soft-close and frameless fittings |
| Electrical, data & making good | ~10% | Relocated power and data points, ceiling patching, paint |
Source: Hypro Renovation project quotations, KL & Selangor, 2024–2026.
Two extras catch tenants out: demolition of existing partitions (priced per square foot removed) and after-hours-only rules in managed buildings, where hacking and drilling must happen at night. Both show up as separate lines in our itemised quote, so you can compare fairly against any other office partition contractor in Kuala Lumpur or Selangor.
Key takeaway — Ask every contractor to split materials, labour, doors and making good into separate lines. A lump-sum price hides exactly the items that blow the budget later.
Want a fixed number instead of a range?
We measure your floor, confirm the layout and hand you a line-by-line quotation. Free, no obligation. Glass, drywall, doors and making good priced separately so you can compare fairly.
Installation Process & Timeline
A single meeting room takes 2 to 3 days. A small office suite takes 1 to 2 weeks, and a full office renovation 2 to 4 weeks. Every Hypro project follows the same five steps, from site visit to handover.
| Project type | Typical duration | Notes |
|---|---|---|
| Single meeting room / manager cabin | 2–3 days | Drywall or framed glass, one door |
| Small office suite (up to 2,000 sq ft) | 5–10 days | Several rooms plus electrical relocation |
| Full office floor renovation | 2–4 weeks | Partitions, ceilings, flooring and paint together |
| Operable wall installation | 3–5 days on site | Panel fabrication lead time quoted separately |
Source: Hypro Renovation project records, KL & Selangor, 2024–2026.
The five steps in every job:
Free site visit
We measure the floor, check building rules and access, and discuss the layout.
Fixed itemised quote
Materials, labour, doors, electrical works and any demolition, line by line.
Design & materials confirmed
Board grade, glass type, door positions and finishes locked before ordering.
Installation
Frame up, boards or glass in, joints finished and painted by our own CIDB-certified installers.
Inspection & handover
Joint check against the quote before we call it done.
Key takeaway — Most offices are ready within a month. If your building only allows night works, tell us early; we plan the crew schedule around it instead of charging surprise surcharges later.
A door hung off or a wall out of plumb stays visible for the life of the office. That's why our own certified crew installs every job, never a sub.
Which Partition System Should You Pick?
Choose a drywall partition for privacy and budget, glass office partitions for daylight and a premium front, and an operable wall for rooms that must split and rejoin. Most offices mix two or three systems on one floor.
| Factor | Gypsum drywall | Aluminium-framed glass | Frameless glass | Operable wall |
|---|---|---|---|---|
| Privacy & acoustics | Best — solid, takes rockwool infill | Moderate, frame seals help | Moderate, joints leak sound | Good when closed, acoustic-rated panels |
| Natural light | Blocks light | Excellent | Excellent | Blocks when closed |
| Cost level | Lowest | Mid | High | Highest |
| Best for | Back offices, stores, server rooms | Meeting rooms, manager cabins | Boardrooms, reception fronts | Training rooms, event halls |
Source: aggregated Malaysian market guidance incl. Partition.my and APS Malaysia; Hypro installation experience, 2024–2026.
On acoustics, the gap is real: a drywall partition with rockwool infill keeps confidential conversations confidential, while bare glass lets more sound through. Top-grade operable walls close the gap when shut. Acoustic operable systems sold in Malaysia, such as those listed by APS Malaysia, reach sound ratings comparable to solid walls.
In practice, most floors mix systems. Glass office partitions face the entrance where clients walk in, drywall wraps the server room and store, and an operable wall splits the training room. One Hypro team installs all of them, which keeps lines aligned and the schedule tight.
Key takeaway — Match the system to the room's job: drywall for privacy, glass for light and image, operable walls for flexibility. Mixing them on one floor usually beats forcing one system everywhere.
Service Areas: Kuala Lumpur, Selangor & the Klang Valley
We install office partitions KL-wide and across Selangor — Petaling Jaya, Shah Alam, Subang Jaya, Klang, Puchong, Kajang, Rawang and Sungai Buloh. From our base in Bandar Sri Damansara, most of the Klang Valley is within 45 minutes for a free site visit.
For chain outlets, corporate rollouts and factory offices, we travel beyond the Klang Valley too. Malaysia-wide coverage is quoted case by case. WhatsApp us your location and floor area to check.
A well-planned partition layout decides how your office works for the next five years: which conversations stay private, how far daylight reaches, and what clients see when they walk in. Prices are predictable once the system and layout are set, and most floors finish within a month. The only real risk is workmanship. That's why a CIDB-certified specialist with its own crew beats a general renovator passing the job to the cheapest sub.
Office Partition Design Ideas
Still picturing the layout? The short video below shows modern office partition ideas to spark your own floor plan before the site visit.
Source video: Watch on YouTube
What KL & Selangor Clients Say About Hypro
Verified Google reviews from offices, shops and homes we've fitted out across the Klang Valley.
Ready to turn an empty floor into a working office?
Book a free site visit. We'll measure your space, recommend the right mix of drywall and glass for your layout and budget, and hand you a fixed itemised quote on the spot.
Frequently Asked Questions
A gypsum drywall partition costs around RM8 to RM14 per square foot installed in KL and Selangor. Aluminium-framed glass runs RM28 to RM45, frameless tempered glass RM40 to RM70, and operable walls RM80 to RM140. Demolition of old partitions and after-hours works are quoted separately.
Standard gypsum board suits most office walls. Use moisture-resistant board around pantries and toilets, and fire-rated board where your building or bomba requirements call for it. Plywood costs less as a raw board but needs more finishing to look like an office wall, so gypsum usually wins on the installed price.
A single meeting room takes 2 to 3 days. A small office suite takes 5 to 10 days, and a full office floor with ceilings, flooring and paint takes 2 to 4 weeks. Night-works-only buildings add a few days to the schedule.
Yes. The same team handles ceilings, lighting, electrical and data points, doors, flooring and painting, and we prepare the drawings and method statements your building management asks for. One contractor, one schedule, one point of responsibility.
Yes. Site visits and itemised quotations are free throughout KL and Selangor. WhatsApp 017-786 8793 with your location and floor area, and we'll arrange a time within the week.