Best Drywall Partition Contractor in Malaysia
Metal-stud drywall partition walls built dry and fast for offices, shops and homes across the Klang Valley — measured, supplied and installed by our own CIDB-certified crew, with no bricklaying and no wet-trade mess.
Book a free site visit →Hypro Renovation is a CIDB-certified drywall partition contractor building metal-stud walls across KL, Selangor and the Klang Valley. A standard drywall partition costs about RM9 to RM13 per square foot installed, a rockwool acoustic build-up runs RM14 to RM20, and most rooms are framed and boarded in 1 to 4 days. Own installers, free site visit, fixed itemised quote. WhatsApp 017-786 8793 to book.
Drywall Partition Systems We Install
As a drywall partition contractor we build three metal-stud systems: a laminated wall for everyday rooms, a rockwool-insulated acoustic build-up for sound control, and a cement board wall for wet or high-traffic areas. The same crew frames a room divider at home and a full office partition fit-out.
Laminated drywall partition
Gypsum boards screwed to both sides of a galvanised metal stud frame, joints taped, then skim-coated to a seamless, paint-ready finish. The standard pick for bedrooms, store rooms and consultation rooms.
Acoustic stud wall
The same frame with dense rockwool packed in the cavity. It cuts conversation noise between meeting rooms, clinics, hotel rooms and bedrooms beside the living hall.
Cement board partition
Cement-based boards on a heavier frame for kitchens, bathroom borders, semi-outdoor walls and any surface that will be tiled or takes daily knocks.
Every one is dry construction — a galvanised metal stud frame, gypsum board both sides, no bricks and no cement curing. The finished wall weighs a fraction of masonry, so building managements approve it quickly, and a double board layer stiffens it enough to carry a TV or wall units. Where the plan calls for a rating we build fire-rated partition walls on the same frame, and when a job pairs the wall with an L-box above it, one team handles the ceiling partition scope in the same schedule.
See it first — Browse completed drywall partition, ceiling and shopfit projects across KL and Selangor. See our partition projects →
Why Choose Hypro for Drywall Partition
Hypro is a CIDB-certified drywall partition contractor with 20+ years on the tools, and our own installers frame every wall in our portfolio — from a single office room divider to a whole floor of partitioned rooms with doors and glass inserts.
No bricks, no cement curing, no week-long wait. The wall goes up fast and comes out plumb — framed, boarded and finished by one Hypro crew.
Drywall Partition Price in Malaysia
In 2026, a standard drywall partition in KL and Selangor costs around RM9 to RM13 per square foot installed. A laminated double-layer wall runs RM12 to RM16, a rockwool acoustic build-up RM14 to RM20, and a cement board wall RM16 to RM24. Get an exact figure with a free site measurement.
Your per-square-foot rate firms up once wall height, board grade and door count are set, but the ranges below cover most jobs we price. Independent market rates in partition.my’s 2026 price guide sit in the same bands.
| System type | Installed price (per sq ft) | Relative cost |
|---|---|---|
| Standard gypsum board partition (single layer) | RM9 – RM13 | RM9–13 |
| Laminated double-layer drywall | RM12 – RM16 | RM12–16 |
| Rockwool-insulated acoustic partition | RM14 – RM20 | RM14–20 |
| Cement board partition | RM16 – RM24 | RM16–24 |
Source: Hypro Renovation project quotations, KL & Selangor, 2024–2026. Market cross-check: partition.my.
Key takeaway — Budget RM9 to RM13 per square foot for a standard wall, and add RM4 to RM7 when you want a rockwool acoustic build-up. Confirm the price with a site visit — the figure a proper drywall partition contractor will put in writing before any work starts.
What Affects Your Drywall Partition Quote
Boards, metal studs and labour make up roughly 70% of a typical drywall partition quote. The rest is insulation, doors and wiring provisions. Double-volume heights, glass inserts and old-wall demolition add surcharges, which is why a free site visit beats any phone estimate.
| Cost component | Typical share of quote | What moves it |
|---|---|---|
| Gypsum boards + metal studs | ~40% | Board grade (standard / moisture-resistant / fire-rated) and single vs double layer |
| Labour & finishing | ~30% | Wall height, site access, skim quality |
| Insulation infill | ~15% | Rockwool thickness and density |
| Doors, frames & wiring provisions | ~15% | Door sets, socket points, switch boxes |
Source: Hypro Renovation project quotations, KL & Selangor, 2024–2026.
Two extras catch people out: demolition of an existing wall (priced per square foot removed) and door sets, which are quoted per unit rather than folded into the wall rate. Both appear as separate lines on our itemised quote, so you can compare it fairly against any other drywall partition contractor in Kuala Lumpur or Selangor.
Want a fixed number instead of a range?
We measure, confirm the system and hand you a line-by-line quotation. Free, no obligation. Glass, boards, insulation and doors priced separately so you can compare fairly.
Drywall Partition Installation Process & Timeline
A single room divider takes 1 to 2 days. Walling up two or three rooms at home takes 2 to 4 days, and an office floor runs 5 to 10 days. Every ceiling and partition project we run follows the same five steps from site visit to handover.
| Project type | Typical duration | Notes |
|---|---|---|
| Single room divider (up to ~120 sq ft) | 1–2 days | Single layer, standard height |
| Home renovation, 2–3 new walls | 2–4 days | Includes skim coat drying time |
| Retail / F&B outlet | 4–8 days | Often night works to fit mall rules |
| Office floor fit-out | 5–10 days | Acoustic infill and door sets add days |
Source: Hypro Renovation project records, KL & Selangor, 2024–2026.
The five steps in every job:
Free site visit
We measure, check the floor and ceiling line, and confirm where doors and socket points go.
Fixed itemised quote
Boards, framing, insulation, doors and any demolition, line by line.
Materials confirmed
Board grade, rockwool spec and door sets locked before ordering.
Installation
Studs up, boards on, joints taped, skim coat applied by our own CIDB-certified installers.
Inspection & handover
Joint check against the quote before we call it done.
Key takeaway — A drywall partition is dry construction, with no brick-curing stage, so a room divided on Monday can usually be painted by midweek. Plan paint and built-ins for after the skim coat has fully dried.
A cracked joint or an off-plumb stud shows every time you walk past. That is why a drywall partition contractor with its own CIDB-certified crew beats a general renovator passing the job to the cheapest sub.
Drywall Partition vs Brick Wall vs Glass: Which Should You Pick?
Choose a drywall partition for speed, light weight and value, brick for permanent wet-area walls, and glass for office fronts that need visibility. For most interior room divisions in homes and offices, dry construction wins on cost and schedule.
| Factor | Drywall / gypsum | Brick wall | Glass partition |
|---|---|---|---|
| Installed cost (per sq ft) | RM9 – RM20 | RM18 – RM30 | RM35 – RM70 |
| Weight on structure | Light | Heavy, may need approval | Moderate |
| Build speed | 1–2 days per room, no curing | 3–5 days plus plaster curing | 1–2 days, fabricated off-site |
| Soundproofing | Good with rockwool infill | Very good | Limited |
| Best for | Bedrooms, offices, shops | Wet areas, external walls | Meeting room fronts, shopfronts |
Source: aggregated Malaysian market guidance incl. partition.my and Saint-Gobain Malaysia; Hypro installation experience, 2024–2026.
Weight decides more projects than looks do. Condo and office-tower managements often restrict brickwork over floor loading and debris, while a stud wall clears approval with far less friction. Sound is the other surprise: many owners assume only masonry blocks noise, but stone-wool makers like ROCKWOOL publish build-ups showing how dense infill brings a stud wall close to masonry quietness at a fraction of the weight.
Many fit-outs mix systems. Board walls form the rooms, a glass front opens up the meeting room, and cement board handles the pantry wall. One Hypro crew builds all of it, which keeps levels aligned and the schedule tight.
Key takeaway — Match the wall to the job: dry construction for speed and weight limits, brick for wet permanence, glass for visibility. Mixing systems in one fit-out is normal and usually the cheapest path.
Drywall Partition Service Areas: Kuala Lumpur, Selangor & the Klang Valley
We build drywall partition walls Kuala Lumpur-wide and across Selangor — PJ, Shah Alam, Subang Jaya, Klang, Puchong, Kajang, Rawang and Sungai Buloh. From our base in Bandar Sri Damansara, most of the Klang Valley is within 45 minutes for a free site visit.
For commercial work such as office chains, factories and hotel fit-outs, we take jobs beyond the Klang Valley too. Malaysia-wide coverage is quoted case by case — WhatsApp your location and rough wall length to check.
Dry partitioning is the fastest, lightest and most budget-friendly way to add a room in a Malaysian home or office. Prices stay predictable once the system is set, most walls go up in days rather than weeks, and a rockwool-insulated build-up quiets a room better than most people expect. The real risk is workmanship — a wavy wall or a cracked joint line shows forever — so a drywall partition contractor with its own CIDB-certified crew beats a general renovator subbing the job out.
Modern Drywall Partition Wall Design Ideas
Still gathering ideas? The short video below rounds up modern partition and room-divider designs to browse before your site visit.
Modern living Room Partition Wall Designs 2024 Room Divider Ideas | Home Interior Wall Decoration
Source video: Watch on YouTube
Ready to turn one space into two?
Book a free site visit. We’ll measure your space, confirm the build-up you need, and hand you a fixed itemised quote on the spot — the way a drywall partition contractor should work.
Drywall Partition FAQs
A standard drywall partition costs around RM9 to RM13 per square foot installed in KL and Selangor. A laminated double-layer wall runs RM12 to RM16, a rockwool acoustic build-up RM14 to RM20, and a cement board wall RM16 to RM24. Doors and demolition are quoted separately.
A single room divider takes 1 to 2 days. Two or three new walls at home take 2 to 4 days including skim-coat drying, while an office floor runs 5 to 10 days depending on acoustic infill and door count.
Yes, if it is built for it. A standard single-layer wall softens noise; packing rockwool into the stud cavity and adding a second board layer makes normal conversation next door hard to hear. Tell us how the room will be used and we spec the build-up.
Yes. We fit timber or metal backing inside the frame at the planned mounting points during installation, or use heavy-duty hollow-wall anchors for lighter loads. Flag it at the site visit so the backing goes in before the boards close up.
Yes. As a drywall partition contractor serving KL and Selangor, our site visits and itemised quotations are free. WhatsApp 017-786 8793 with your location and a rough wall length, and we’ll arrange a time within the week.