Drywall & Gypsum Board Partition Contractor in KL & Selangor
Standard, acoustic and cement board drywall partition walls for homes, offices and shops — measured, supplied and installed by our own CIDB-certified crew across the Klang Valley.
Last updated: 11 June 2026
Book a free site visit →Hypro Renovation builds drywall and gypsum board partition walls across KL, Selangor and the Klang Valley. Standard walls cost around RM9 to RM13 per square foot installed, rockwool acoustic systems run RM14 to RM20, and most rooms are walled up within 1 to 4 days. CIDB-certified installers, free site visit, fixed itemised quote. WhatsApp 017-786 8793 to book.
Partition Systems We Install
We install three main systems: laminated drywall partition on a metal stud frame, rockwool-insulated acoustic partition, and cement board partition for wet or hard-knock areas. The same crew handles room dividers in homes and full office partition fit-outs.
Laminated drywall partition
Gypsum boards screwed to both sides of a galvanised metal stud frame, joints taped, then skim-coated for a seamless, paint-ready wall. The standard pick for bedrooms, store rooms and consultation rooms.
Rockwool-insulated acoustic partition
The same frame with dense rockwool packed inside the cavity. It cuts conversation noise between meeting rooms, clinics, hotel rooms and bedrooms that share a wall with the living hall.
Cement board partition
Cement-based boards on a heavier frame for kitchens, bathroom borders, semi-outdoor walls and any surface that will be tiled or takes daily knocks.
All three are dry systems. No bricks, no cement rendering, no waiting for plaster to cure. A gypsum board partition weighs a fraction of a brick wall, which is why condo managements approve it readily, and a double board layer stiffens the wall enough to carry a TV or cabinets. Where regulations call for it, we also build fire-rated partition walls with the correct board grade and infill. Homeowners often pair the new wall with an L-box ceiling above it, and one team handles the full ceiling partition scope in a single schedule.
See it first — Browse completed partition and ceiling projects in homes, offices and shops across KL and Selangor. See our partition projects →
Why Choose Hypro
Hypro is a CIDB-certified drywall partition contractor with 20+ years in ceiling partition works, not a general renovator. Our own installers build every wall you see in our project portfolio, from single room dividers to full office layouts with doors and glass inserts.
No bricks, no cement curing, no week-long wait. A gypsum board partition goes up fast and comes out plumb — measured, framed and finished by one Hypro team.
Gypsum Partition Price in Malaysia
In 2026, a standard gypsum board partition in KL and Selangor costs around RM9 to RM13 per square foot installed. Laminated double-layer drywall runs RM12 to RM16, rockwool acoustic systems RM14 to RM20, and cement board RM16 to RM24. Get an exact figure with a free site measurement.
Per-square-foot rates firm up once wall height, board grade and door count are confirmed, but the ranges below cover most jobs we price. Independent market rates published in partition.my's 2026 price guide sit in the same bands.
| System type | Installed price (per sq ft) | Relative cost |
|---|---|---|
| Standard gypsum board partition (single layer) | RM9 – RM13 | RM9–13 |
| Laminated double-layer drywall | RM12 – RM16 | RM12–16 |
| Rockwool-insulated acoustic partition | RM14 – RM20 | RM14–20 |
| Cement board partition | RM16 – RM24 | RM16–24 |
Source: Hypro Renovation project quotations, KL & Selangor, 2024–2026. Market cross-check: partition.my.
Key takeaway — Budget RM9 to RM13 per square foot for a standard gypsum board partition, and add RM4 to RM7 when you need rockwool soundproofing. Then confirm with a site visit, because wall height and door sets move the number.
What Affects Your Quote
Boards, framing and labour take up roughly 70% of a typical drywall partition quote. The rest covers insulation, doors and wiring provisions. Double-volume heights, glass inserts and old-wall demolition add surcharges, which is why a free site visit beats any phone estimate.
| Cost component | Typical share of quote | What moves it |
|---|---|---|
| Gypsum boards + metal studs | ~40% | Board grade (standard / moisture-resistant / fire-rated) and single vs double layer |
| Labour & finishing | ~30% | Wall height, site access, skim quality |
| Insulation infill | ~15% | Rockwool thickness and density |
| Doors, frames & wiring provisions | ~15% | Door sets, socket points, switch boxes |
Source: Hypro Renovation project quotations, KL & Selangor, 2024–2026.
Two extras catch people out: demolition of an existing wall (priced per square foot removed) and door sets, which are quoted per unit rather than folded into the wall rate. Both appear as separate lines in our itemised quote, so you can compare fairly against any other gypsum board partition contractor in Kuala Lumpur or Selangor.
Want a fixed number instead of a range?
We measure, confirm the system and hand you a line-by-line quotation. Free, no obligation. Glass, boards, insulation and doors priced separately so you can compare fairly.
Installation Process & Timeline
A single room divider takes 1 to 2 days. Walling up two or three rooms in a home takes 2 to 4 days, and office floors run 5 to 10 days. Every ceiling and partition project we run follows the same five steps from site visit to handover.
| Project type | Typical duration | Notes |
|---|---|---|
| Single room divider (up to ~120 sq ft) | 1–2 days | Single layer, standard height |
| Home renovation, 2–3 new walls | 2–4 days | Includes skim coat drying time |
| Retail / F&B outlet | 4–8 days | Often night works to fit mall rules |
| Office floor fit-out | 5–10 days | Acoustic infill and door sets add days |
Source: Hypro Renovation project records, KL & Selangor, 2024–2026.
The five steps in every job:
Free site visit
We measure, check the floor and ceiling line, and confirm where doors and socket points go.
Fixed itemised quote
Boards, framing, insulation, doors and any demolition, line by line.
Materials confirmed
Board grade, rockwool spec and door sets locked before ordering.
Installation
Studs up, boards on, joints taped, skim coat applied by our own CIDB-certified installers.
Inspection & handover
Joint check against the quote before we call it done.
Key takeaway — Drywall is dry construction. There is no brick curing stage, so a room divided on Monday can usually be painted by midweek. Plan paint and built-ins for after the skim coat has fully dried.
A cracked joint or an off-plumb frame is visible every time you walk past. That is why a specialist with its own CIDB-certified crew beats a general renovator passing the job to the cheapest sub.
Drywall vs Brick Wall vs Glass Partition: Which Should You Pick?
Choose a gypsum board partition for speed, light weight and value, brick for permanent wet-area walls, and glass for office fronts that need visibility. For most interior room divisions in homes and offices, drywall wins on cost and schedule.
| Factor | Drywall / gypsum | Brick wall | Glass partition |
|---|---|---|---|
| Installed cost (per sq ft) | RM9 – RM20 | RM18 – RM30 | RM35 – RM70 |
| Weight on structure | Light | Heavy, may need approval | Moderate |
| Build speed | 1–2 days per room, no curing | 3–5 days plus plaster curing | 1–2 days, fabricated off-site |
| Soundproofing | Good with rockwool infill | Very good | Limited |
| Best for | Bedrooms, offices, shops | Wet areas, external walls | Meeting room fronts, shopfronts |
Source: aggregated Malaysian market guidance incl. partition.my and Saint-Gobain Malaysia; Hypro installation experience, 2024–2026.
Weight decides more projects than looks do. Condo and office tower managements often restrict brick works because of floor loading and debris, while a drywall partition passes approval with far less friction. Sound is the other surprise: brick owners assume only masonry blocks noise, but stone wool makers like ROCKWOOL publish wall build-ups showing how dense infill brings a stud wall close to masonry-level quietness at a fraction of the weight.
Many fit-outs mix systems. Gypsum partition walls form the rooms, a glass front opens up the meeting room, and cement board handles the pantry wall. One Hypro team builds all of it, which keeps levels aligned and the schedule tight.
Key takeaway — Match the wall to the job: drywall for speed and weight limits, brick for wet permanence, glass for visibility. Mixing systems in one fit-out is normal and usually the cheapest path.
Service Areas: Kuala Lumpur, Selangor & the Klang Valley
We build gypsum partition walls Kuala Lumpur-wide and across Selangor — PJ, Shah Alam, Subang Jaya, Klang, Puchong, Kajang, Rawang and Sungai Buloh. From our base in Bandar Sri Damansara, most of the Klang Valley is within 45 minutes for a free site visit.
For selected commercial projects such as office chains, factories and hotel works, we travel beyond the Klang Valley too. Malaysia-wide coverage is quoted case by case. WhatsApp us your location and rough wall length to check.
A drywall partition is the fastest, lightest and most budget-friendly way to create a new room in a Malaysian home or office. Prices stay predictable once the system is chosen, most walls go up in days rather than weeks, and a gypsum board partition with rockwool infill quiets a room far better than most people expect. The real risk is workmanship, because a wavy wall or a cracked joint line shows forever. That is why a specialist with its own CIDB-certified crew beats a general renovator passing the job to the cheapest sub.
Modern Partition Wall Design Ideas
Still gathering ideas? The short video below rounds up modern partition design ideas to browse before your site visit.
Modern living Room Partition Wall Designs 2024 Room Divider Ideas | Home Interior Wall Decoration
Source video: Watch on YouTube
What KL & Selangor Clients Say About Hypro
Verified Google reviews from offices, shops and homes we've fitted out across the Klang Valley.
Ready to turn one space into two?
Book a free site visit. We'll measure your space, recommend the right partition system for your noise and budget needs, and hand you a fixed itemised quote on the spot.
Frequently Asked Questions
A standard gypsum board partition costs around RM9 to RM13 per square foot installed in KL and Selangor. Laminated double-layer walls run RM12 to RM16, rockwool acoustic systems RM14 to RM20, and cement board partitions RM16 to RM24. Doors and demolition are quoted separately.
A single room divider takes 1 to 2 days. Two or three new walls in a home take 2 to 4 days including skim coat drying, while office floors run 5 to 10 days depending on acoustic infill and door count.
Yes, if it is built for it. A standard single-layer wall softens noise. Packing rockwool into the cavity and adding a second board layer makes normal conversation next door hard to hear. Tell us how the room will be used and we will spec the right build-up.
Yes. We add timber or metal backing inside the gypsum board partition at the planned mounting points during installation, or use heavy-duty hollow-wall anchors for lighter loads. Tell us during the site visit so the backing goes in before the boards close up.
Yes. Site visits and itemised quotations are free throughout KL and Selangor. WhatsApp 017-786 8793 with your location and a rough wall length, and we'll arrange a time within the week.